Moog Music MF-108M Cluster Flux - Manual (Page 8)

8
5. PEDAL FLANGE
This setup requires an Expression Pedal such
as the Moog EP-2. Pedal Flanging allows
real-time control of the flange frequency
and can be played like a wah-wah effect.
•Connect an EP-2 or other compatible
expression pedal to the TIME control
voltage input
•Set TIME at center position to get full
sweep from the expression pedal
•Negative FEEDBACK gives this effect a
deeper more hollow tone
•Try a little AMOUNT to add modulation to
the pedal flange effect
•The MIX control should be set almost all
the way up for this effect
6. SQUARE WAVE CHORUS
The LFO square wave can be used for creative
rhythmic and pitch modulation effects. This
effect features a sudden up-and-down
modulation of the input signal’s pitch, with a
50-50 mix of wet and dry signal.
•Tune the TIME control in conjunction with
the AMOUNT for a harmonic trill effect
•Adding FEEDBACK will increase retention
of pitch modulation with sudden changes
of the square wave modulation
•For best Chorus results, MIX control should
be set to center position