Cobalt Digital FUSION 3G 9921-FS 3G_HD_SD Frame Sync - Manual (Page 48)

2
Installing a Rear Module
2-12 9921-FS PRODUCT MANUAL 9921-FS-OM (V1.15)
RM20-9921-XE Expansion Rear Module Used in conjunction with a base Rear Module to
provide the following additional connections:
• Eight analog balanced audio I/O ( AN-AUD I/O 1
thru AN-AUD I/O 8 ; I/O function of each connection
is switch-configurable)
• Two fiber I/O (GUI configurable as I/O)
• Four expansion 3G/HD/SD-SDI coaxial outputs
(reserved function)
• Analog Y/composite, Pr/C, and Pb coaxial inputs
(Y IN, Pr IN, and Pb/C IN, respectively)
• Analog Y/composite, Pr/C, and Pb coaxial outputs
(Y OUT, Pr OUT, and Pb/C OUT, respectively)
RM20-9921-XF Expansion Rear Module Used in conjunction with a base Rear Module to
provide the following additional connections:
• Two analog balanced audio I/O ( AN-AUD I/O 1 and
AN-AUD I/O 2 ; I/O function of each connection is
switch-configurable)
• Two fiber I/O (GUI configurable as I/O)
• Analog Y/composite, Pr/C, and Pb coaxial inputs
(Y IN, Pr IN, and Pb/C IN, respectively)
• Analog Y/composite, Pr/C, and Pb coaxial outputs
(Y OUT, Pr OUT, and Pb/C OUT, respectively)
Table 2-1 9921-FS Rear Modules — continued
9921-FS Rear Module Description