Cobalt Digital FUSION 3G 9921-FS 3G_HD_SD Frame Sync - Manual (Page 93)

9921-FS-OM (V1.15) 9921-FS PRODUCT MANUAL 3-41
Operating Instructions
9921-FS Function Submenu List and Descriptions
Output Audio Routing/Controls
Provides controls to route card audio from card
processing paths to 16-channel embedded and
16-channel AES audio destinations external of the card.
Use the corresponding sub-tab to access embedded or
AES output routing.
Table 3-2 9921-FS Function Submenu List — continued
The card internal bus, Audio DSP outputs, and the
Dolby encoder output pair are available as sources
for the card embedded audio and AES audio
outputs.
The example here shows various Source routing
selections (using the Emb Audio Out and AES
Audio Out sub-tabs) that direct upmix outputs L
thru Rs to Embedded outputs Ch 1 thru Ch 6, the
pre-upmix Bus Ch1 and Ch 2 sources to Embedded
outputs Ch 7 and Ch 8, and a Dolby encoded pair
to AES outputs Ch 1 and Ch 2 (unused embedded
and AES channels can be set to Silence or Mute).
Each bus channel provides Gain, Mute, and a peak
level display.
The source-to-destination correlation shown here is
only an example; any of the digital audio output
destinations described on the following pages can
receive inputs from any of the internal bus, DSP, or
Dolby encoder sources.
Embed Out
Ch 7, Ch 8
AES Out
Ch 1, Ch 2
Output Audio
Crosspoint
Card 16-Ch Internal Bus
Audio
DSP
Dolby ®
AC-3
Encode
Bus Ch 1, 2
Upmix L thru Rs Embed Out
Ch 1 - Ch 6
Dolby ENC