Cobalt Digital FUSION 3G 9921-FS 3G_HD_SD Frame Sync - Manual (Page 53)

9921-FS-OM (V1.15) 9921-FS PRODUCT MANUAL 3-1
Chapter 3
Chapter 3
Operating Instructions
Overview
This chapter contains the following information:
• Control and Display Descriptions (p. 3-1)
• Accessing the 9921-FS Card via Remote Control (p. 3-6)
• Checking Card Information (p. 3-8)
• Ancillary Data Line Number Locations and Ranges (p. 3-9)
• 9921-FS Function Submenu List and Descriptions (p. 3-10)
• Troubleshooting (p. 3-62)
Control and Display Descriptions
Note: When you are familiar with the card functions and controls described in this
chapter, please go to the Support>Documents>Reference Guides link at
www.cobaltdigital.com for Fusion3G
® application notes covering comprehen-
sive setup of practical processing applications.
This section describes the user interface controls, indicators, and displays
(both on-card and remote controls) for using the 9921-FS card. The 9921-FS
functions can be accessed and controlled using any of the user interfaces
described here.
The format in which the 9921-FS functional controls, indicators, and displays
appear and are used varies depending on the user interface being used.
Regardless of the user interface being used, access to the 9921-FS functions
(and the controls, indicators, and displays related to a particular function)
follows a general arrangement of Function Submenus under which related
controls can be accessed (as described in Function Submenu/Parameter
Submenu Overview below).
If you are already familiar with
using DashBoard or a Cobalt
Remote Control Panel to control
Cobalt cards, please skip to
9921-FS Function Submenu List
and Descriptions (p. 3-10).