Cobalt Digital COMPASS 9034 Input Processing Analog to Digital Video - Manual (Page 25)

9034-OM (V4.1) 9034 PRODUCT MANUAL 1-21
Introduction
Technical Specifications
Analog Video Input (cont.) Video Input Types:
HD: Component YPbPr and RGB SMPTE
SD: Composite, Component YPbPr (BetaCam™, MII™,
SMPTE/N10), RGB, and Y/C
Conversion Bit Depth:
12 bits
SD Color Separation:
5-Line Adaptive Comb or Notch Filter
Frequency Response (HD):
Y: 0 – 25 MHz ± 0.3 dB
Pb/B: 0 – 13.5 MHz ± 0.3 dB
Pr/R: 0 – 13.5 MHz ± 0.3 dB
Frequency Response (SD):
0 – 5.2 MHz ± 0.25dB
Differential Phase (SD):
< ± 0.4° typical
Differential Gain (SD):
< ± 0.4% typical
Analog Front-End Crosstalk:
Within noise floor measurement
Return Loss:
> 20 dB to 30 MHz
Resolution 10-bit video data path
Video A/D Process HD: 4:4:4
SD: 8:8:8
Resolution: 12-bit A/D and 10-bit video data path
SD Comb Filter: 5-line adaptive
Post-Processor Serial Digital Video
Outputs Number of Outputs:
Two HD/SD-SDI BNC per IEC 60169-8 Amendment 2 (9034-SD
is SD only)
Impedance:
75 Ω
Return Loss:
> 15 dB at 5 MHz – 270 MHz
> 12 dB at 270 MHz – 1.485 GHz
Table 1-2 Technical Specifications — continued
Item Characteristic