Operating instructions, 9034 function submenu list and descriptions – Cobalt Digital COMPASS 9034 Input Processing Analog to Digital Video User Manual
Page 79
9034-OM (V4.1)
9034 PRODUCT MANUAL
3-39
Operating Instructions
9034 Function Submenu List and Descriptions
(continued)
• HD ATC_LTC Insertion Control
For HD output, enables or disables ATC_LTC timecode insertion into the
output video, and selects the line number for ATC_LTC timecode data.
• HD ATC_VITC Insertion Control
For HD output, enables or disables ATC_VITC timecode insertion into the
output video, and selects the line number for ATC_VITC1 and
ATC_VITC2.
Note: If only one output line is to be used, set both controls for the same
line number.
• ATC_VITC Legacy Support Control
When enabled, accommodates equipment requiring ATC_VITC packet in
both fields as a “field 1” packet (non-toggling).
Note: Non-toggling VITC1 and VITC2 packets do not conform to
SMPTE 12M-2-2008 preferences. As such, ATC_VITC Legacy
Support should be enabled only if required by downstream
equipment.
Table 3-2
9034 Function Submenu List — continued