Cobalt Digital COMPASS 9034 Input Processing Analog to Digital Video - Manual (Page 73)

9034-OM (V4.1) 9034 PRODUCT MANUAL 3-33
Operating Instructions
9034 Function Submenu List and Descriptions
(continued)
• Metadata Output Line
Allows selection of SMPTE 2020-1 metadata line location within the VANC
space for source embedding selected above.
(Range is 9 thru 41; default is line #13.)
Note: • Although the output line drop-down will allow any choice within the
9 thru 41 range, the actual range is automatically clamped (limited
to) certain ranges to prevent inadvertent conflict with active
picture area depending on video format. See Ancillary Data Line
Number Locations and Ranges (p. 3-8) for more information.
• The card does not check for conflicts on a given line number.
Make certain the selected line is available and carrying no other
data unless existing metadata is to be intentionally overwritten.
Table 3-2 9034 Function Submenu List — continued