Troubleshooting, Troubleshooting -48, Error and failure indicator overview -48 – Cobalt Digital COMPASS 9034 Input Processing Analog to Digital Video User Manual
Page 88: Troubleshooting (p. 3-48)
3
Troubleshooting
3-48
9034 PRODUCT MANUAL
9034-OM (V4.1)
Troubleshooting
This section provides general troubleshooting information and specific
symptom/corrective action for the 9034 card and its remote control interface.
The 9034 card requires no periodic maintenance in its normal operation; if
any error indication (as described in this section) occurs, use this section to
correct the condition.
Error and Failure Indicator Overview
The 9034 card itself and its remote control systems all (to varying degrees)
provide error and failure indications. Depending on how the 9034 card is
being used (i.e, standalone or network controlled through DashBoard™ or a
Remote Control Panel), check all available indications in the event of an error
or failure condition.
The various 9034 card and remote control error and failure indicators are
individually described below.
Note:
The descriptions below provide general information for the various status and
error indicators. For specific failures, also use the appropriate subsection
listed below.
• Basic Troubleshooting Checks (p. 3-52)