Cobalt Digital COMPASS 9068 Upconverter - Manual (Page 17)

9068-OM (V4.2) 9068 PRODUCT MANUAL 1-13
Introduction
9068 Functional Description
9068 Rear I/O Modules
The 9068 physically interfaces to system video connections at the rear of its
frame using a Rear I/O Module.
All inputs and outputs shown in the 9068 Functional Block Diagram (Figure
1-1) enter and exit the card via the card edge backplane connector. The
Rear I/O Module breaks out the 9068 card edge connections to BNC
connectors that interface with other components and systems in the signal
chain.
These required BNC connections are provided using Rear I/O Module (which
are described in Chapter 2, “Installation”.
Video Formats Supported by the 9068
The 9068 supports all current SMPTE standard SD and HD video formats.
Table 1-2 lists and provides details regarding the video formats supported by
the 9068.
Table 1-2 Supported Video Formats
Item Description/Specification
Input Video Raster Structure: Frame Rate:
486i
(1)
29.97
575i
(1)
25
Output Video Raster Structure: Frame Rate:
1080PsF 23.98; 24
1080p 23.98; 24
1080i
(1)
25; 29.97; 30
720p 23.98; 24; 25; 29.97; 30; 50; 59.94; 60
486i
(1)
29.97
575i (1) 25
(1) All rates displayed as frame rates; interlaced (“i”) field rates are two times the rate value shown.