Cobalt Digital COMPASS 9068 Upconverter - Manual (Page 46)

3
9068 Function Submenu List and Descriptions
3-18 9068 PRODUCT MANUAL 9068-OM (V4.2)
Allows assignment of AFD (Active Format Description)
codes to the SDI output video, and allows unique ARC
settings to be applied for each AFD code.
When an appropriate AFD code is received by this card,
this function can be used to apply the AFD-directed
re-aspecting, resulting in a properly scaled and cropped
image area.
Note: Overlay markers using this function are for setup only. When enabled, these markers are embedded in the SDI video
output signal and may appear in the image. Use this function only on preview video and not on-air video. Make certain
any overlay tools are turned off when done.
Note: Multiple overlay markers described below can be simultaneously enabled as desired.
• Safe Action Area
Overlays
When enabled (On), turns on the Safe Action Area overlay.
• Safe Title Area When enabled (On), turns on the Safe Title Area overlay.
Table 3-2 9068 Function Submenu List — continued
When enabled (On), outline shows Safe Action Area boundary.
Color of boundary is selected using Color drop-down list.
OVERLAY_SAFACT1.0.PNG
When enabled (On), outline shows Safe Title Area boundary. Color
of boundary is selected using Color drop-down list.
OVERLAY_SAFTLE1.0.PNG