Cobalt Digital FUSION 3G 9985 3G_HD_SD Loudness Processor - Manual (Page 11)

9985-OM (V1.18) 9985 PRODUCT MANUAL 1-7
Introduction
9985 Functional Description
9985 Video and Audio Options
In addition to the I/O options described in Table 1-1 above, the 9985 offers
several video and audio options described in Table 1-2. Note that several
options also require a rear I/O option that supports the video and/or audio
options described here; the complete option requirement is specified in Table
1-2.
Table 1-2 9985 Video/Audio Options
Option Description
Option/Rear Module Package
Required
Note: Options are periodically added for this card. Check for latest options on the card web page at cobaltdigital.com. Most
options, in addition to licensing, require that card be loaded with the latest available firmware.
Video Options
Color Correction In addition to standard video proc controls,
provides independent RGB channel controls
for luma, black, and gamma. • Option +COLOR
Wings Insertion Provides wings insertion using an independent
SDI input provided for wings insertion, with
software-configurable insertion width/pan
controls. • Option +WINGS. Refer to option
Manual Supplement
OPT-SW-F3GWINGS-MS for more
information.
Keying Provides keying using independent SDI inputs
for key and fill signals. Also provides a
separate dedicated key preview SDI output. • Option +KEYER. Refer to option
Manual Supplement OPT-F3KEY-MS
for more information.
Audio Options
Note: Software options below can be field-installed on a card without removal of the card from its frame.
Added second
Linear Acoustic
® Loudness
Processing function
In addition to base loudness processor, a
second Linear Acoustic
® AEROMAX ®
5.1-channel or stereo audio output loudness
processing can be added.
• Option +LP5.1 (5.1-Ch loudness
processing)
• Option +2LP2.0 (dual independent
stereo loudness processing)
• Option +LP2.0 (stereo loudness
processing)
OGCP Loudness Meter
software
(Note 1) 5.1-channel loudness meter in accordance with
EBU R128, ATSC A/85 and ITU BS.1770.
Allows OGCP-9000 to provide user interface. • Option +LM
Linear Acoustic ® Upmixing
software
(Note 2)
Linear Acoustic ® AUTOMAX™ converts legacy
stereo program audio (from any source
received by the card) to 5.1-channel audio.
• Option +UM
Automatic Downmixing Provides a stereo downmix from selected
alternate multi-channel sources if selected
primary L/R channels lose signal. • Option +ADM
Automatic Audio Failover Provides failover to alternate (“secondary”)
channels to substitute for the primary channels
in the event of audio signal loss. • Option +AFO