Cobalt Digital FUSION 3G 9985 3G_HD_SD Loudness Processor - Manual (Page 45)

9985-OM (V1.18) 9985 PRODUCT MANUAL 2-9
Installation and Setup
Installing a Rear Module
RM20-9985-E Base Rear Module Provides the following connections:
• Four SDI video input BNCs ( SDI IN A thru SDI IN D )
• Eight AES I/O BNC (AES-3id) input/outputs
( AES I/O 1 thru AES I/O 8 ; I/O function of each
connection is software-configurable)
• Two opto-isolated GPI inputs (terminals GPI 1-G
and GPI 2-G)
• Two SPST NO GPO relay closure contacts
(floating) (terminals 1/1 and 2/2)
• Two RS485 serial ports; GUI configurable for
function (COMM1 and COMM2)
• Four SDI video output BNCs ( SDI OUT A thru
SDI OUT D )
Note: AES inputs and outputs operational only with card
option +AES installed.
RM20-9985-F Base Rear Module Provides the following connections:
• SDI video input BNC ( SDI IN A )
• Eight AES I/O BNC (AES-3id) input/outputs
( AES 1 thru AES 8 ; I/O function of each connection
is software-configurable)
• SDI video output BNC ( SDI OUT A )
Note: AES inputs and outputs operational only with card
option +AES installed.
Table 2-1 9985 Rear Modules — continued
9985 Rear Module Description