Cobalt Digital COMPASS 9215-EO-EM AES_EBU Fiber Audio Embedder - Manual (Page 45)

9215-EO-EM User Manual •••• (V 1.1) Menus •••• 4-17
6 — Group Enable
Use this menu to determine if the selected group is embedded in the output or not.
7, 8, 9, A — Channel # Source
Use Menus 7 to A to configure the source that is inserted into the embedded group if present. These
menus are used in conjunction with Menu 5 (Group Select). The following are the default values based
on the group selected:
ƒ Group 1 — When Menu 5 is set to Grp1, the default value of Menu 7 is G1C1.
ƒ
Group 2 — When Menu 5 is set to Grp 2, the default value of Menu 8 is G2C2.
ƒ Group 3 — When Menu 5 is set to Grp 3, the default value of Menu 9 is G3C3.
ƒ Group 4 — When Menu 5 is set to Grp 4, the default value of Menu A is G4C4.
B, C, D, E — Channel # Backup Source
Use Menus B to E to configure the Backup Source that is inserted when the Primary Source is
unavailable. This menu is used in conjunction with Menu 5 (Group Select). The following are the
default values based on the group selected:
ƒ Group 1 — When Menu 5 is set to Grp1, the default value of Menu B is G1C1.
ƒ
Group 2 — When Menu 5 is set to Grp 2, the default value of Menu C is G2C2.
ƒ Group 3 — When Menu 5 is set to Grp 3, the default value of Menu D is G3C3.
ƒ Group 4 — When Menu 5 is set to Grp 4, the default value of Menu E is G4C4