Cobalt Digital COMPASS 9215-EO-EM AES_EBU Fiber Audio Embedder - Manual (Page 48)

5-2 •••• Specifications 9215-EO-EM User Manual •••• (V 1.1)
9215-EO-EM Technical Specifications
This section includes the technical specifications ** for the 9215-EO-EM.
Table 5.1 9215-EO-EM Technical Specifications
Category Parameter Specification
Number of Inputs 1
SDI Data Rates and SMPTE
Standards Accommodated
SMPTE 292M, SMPTE 259M-C
Impedance 75ohm terminating
Return Loss >15dB to 1.485GHz
Cable Length with Equalizer >10dB from 1.485GHz to 2.97GHz
SDI Input
Connector Type >300m of Belden 1694A cable @ 270Mbps
Number of Outputs 1
SMPTE Standards Accommodated SMPTE 259M-C, SMPTE 292M
Nominal Wavelength 1310µm
Output Power -7dBm to -2dBm
Optical Output
Connector Type Single Mode, LC/UPC
Number of Outputs 1
SDI Data Rates and SMPTE
Standards Accommodated
SMPTE 292M, SMPTE 259M-C
Impedance 75ohm
Return Loss
>15dB to 1.485GHz
>10dB 1.485GHz to 2.97GHz
Signal Level 800mV, ±10%
DC Offset 0V ±50mV
Rise and Fall Time (20-80%)
700ps typical (270Mbps)
120ps typical (1.485Gbps, 2.97Gbps)
Overshoot <10%
SDI Outputs
Connector Type BNC
Number of Inputs 8 AES-3id inputs
Impedance 75ohm
Input Resolution 24bits
AES Inputs
Nominal Signal Level 1V p-p
Sampling Rate
48kHz compliant with SMPTE 272M-A or any rate
from 20kHz to 96kHz with SRC on
AES Inputs
Connector Type DIN 1.1/2.3
Environmental Operating Range 5°C to 40°C ambient
Power Total Power Consumption <8W
** Specifications are subject to change without notice.