TC Electronic NDR-1 Nova Drive - Manual (Page 11)

11
EN
Connections
1 - Power
NOVA Drive requires 12V DC / 300 mA. Use the power
supply provided in the product box or a power supply
with identical specifications.
2 - Input
1/4" mono jack connector for signal input.
3 - Output
1/4" mono jack connector for signal output.
4 - MIDI
MIDI in/out on a single 5-pin DIN jack for external
control, e.g. from TC’s G-System.
5 - External Switch
For extended control using G-Switch by TC Electronic.
Please read the manual chapter “NOVA Drive & G-
Switch” for further information.
Switches and Knobs
6 – OVERDRIVE Knob
This knob controls the amount of overdrive for the
overdrive section.
7 – LEVEL Knob
Use this knob to control the level of NOVA Drive’s
overdrive section.
8 – TONE Knob
Use this knob to shape the overdrive section’s tone.
Turn the TONE knob to the left for a darker sound and
to the right for a brighter sound.
9 – MIX Knob
With this knob, you can set a mix between the clean
signal and the processed (“driven”) signal. When set
correctly, this will sound as if you played over both a
clean amp and a drive amp simultaneously – a trick
often used in studio recordings for more punch and
transparency. We find it works best with single-coil
pickups for blues/rock.
OPERATION