TC Electronic NDR-1 Nova Drive - Manual (Page 16)

16
By connecting the optional G-Switch from TC
Electronic to the EXT. SW. input on NOVA Drive, you
extend the pedal with three switches. As soon as it is
connected, NOVA Drive detects G-Switch, and you can
use it in the various switch modes as described below.
Please note that with a G-Switch connected, you have
simultaneous access to three presets. Therefore, in
this setup, the presets are not organized in nine banks
with two presets each, but rather in six preset banks
with three presets each. These banks are called A, B,
C, D, E, F. Accordingly, the second preset in Bank A is
displayed as A2.
Normal Mode
•
Use the two switches on NOVA Drive as on/off
switches for overdrive and distortion.
• Use the three switches on G-Switch to select one
of the three presets in the currently selected preset
bank.
• Use the PRESET encoder to select the preset
bank covered by G-Switch (A1/A2/A3; B1/B2/B3;
C1/C2/C3 etc.)
Toggle Mode
•
Use the two switches on NOVA Drive as toggles
for overdrive and distortion.
• Use the three switches on G-Switch to select one
of the three presets in the currently selected preset
bank.
• Use the PRESET encoder to select the preset
NOVA DRIVE & G-SWITCH