TC Electronic NDR-1 Nova Drive - Manual (Page 14)

get” mode (WYSIWYG). In this mode, NOVA Drive can
be used just like two independent pedals, and the
positions of all knobs always represent the respective
values.
To access Manual Mode:
•
Select Normal or Toggle Mode (as described on
the previous page).
• Turn the PRESET encoder counter-clockwise until
the display shows:
Manual Mode is a WYSIWYG mode – but of
course, you can still store the current settings in
any of the 18 preset locations following the
standard store procedure: Press and hold the
PRESET encoder to enter Store Mode, select a
preset location and press the encoder once
more to finalize the store procedure (see also
“20 – PRESET Encoder / Store Button” on the
following page).
14
OPERATION
17/18 – ROUTING Mode Button and LEDs
NOVA Drive allows you to choose between three
different signal routings. A routing defines how the
signal runs through the unit. To switch between
routings, press the ROUTING switch.
Serial Routing (a):
The signal is going through the overdrive section first
and then to the distortion section. This is ideal if you
e.g. use the overdrive section to push the distortion
section (as many guitar players do with a boost pedal).
Serial Routing (b):
The signal is going through the distortion section first
and then to the overdrive section.