Rainbow Electronics MAX7470 - Manual (Page 3)

MAX7469/MAX7470
HDTV Continuously Variable
Anti-Aliasing Filters
_______________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICS (continued)
(AV
DD
= +5V ±5%, DV
DD
= 2.7V to 3.6V, R
LOAD
= 150Ω to GND, C
IN
= 0.1µF, T
A
= 0°C to +85°C, unless otherwise noted. Typical
values are at AV
DD
= 5V, DV
DD
= 3.3V, T
A
= +25°C.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Positive 350
Clamp Settling Time
To 1% with 100 IRE step
(Note 4)
Negative 650
H
Minimum Functional Input Sync
Amplitude
125 mV
MAX7469 -0.5 0 +0.5
Low-Frequency Gain (Note 1)
MAX7470 5.5 6 6.5
dB
Low-Frequency Gain Matching 100kHz 0.05 dB
Maximum Output Voltage
Amplitude
DC to 30MHz 2.4 V P-P
MAX7469 2.4 Maximum Input Voltage
Amplitude
MAX7470 1.2
V P-P
Channel-to-Channel Isolation 62 dB
Output Clamping Level Variation (Notes 1, 4) ±100 mV
Power-Supply Rejection Ratio PSRR DC 50 dB
DIGITAL INPUTS (EXTSYNC, A1, A0)
Input Logic-High Voltage V IH 2.0 V
Input Logic-Low Voltage V IL 0.8 V
Input Leakage Current I IN V IN = 0 to DV DD ±1 ±10 µA
Input Capacitance C IN 6 pF
DIGITAL INPUTS (SDA, SCL)
Input Logic-High Voltage V
IH
0.7 x
DV DD
V
Input Logic-Low Voltage V IL
0.3 x
DV DD
V
Input Hysteresis V HYST
0.05 x
DV DD
V
Input Leakage Current I IN V IN = 0 to DV DD ±0.1 ±10 µA
Input Capacitance C IN 6 pF
DIGITAL OUTPUT (SDA)
Output Logic-Low Voltage V OL I SINK = 3mA 0.4 V
Tri-State Leakage Current I
L
V
IN
= 0 to DV
DD
±0.1 ±10 µA
Tri-State Output Capacitance C OUT 6 pF
POWER REQUIREMENTS
Analog Supply Voltage Range AV DD 4.75 5 5.25 V
Digital Supply Voltage Range DV DD 2.7 3.3 3.6 V
Normal operation, no load 180 200
Analog Supply Current I AVDD
Power-down mode, no load 1 1.5
mA
Digital Supply Current I DVDD f SCL = 400kHz 25 µA