Usart, Dual usart, Atmega162/v – Rainbow Electronics ATmega162V User Manual

Page 165

Advertising
background image

165

ATmega162/V

2513E–AVR–09/03

USART

The Universal Synchronous and Asynchronous serial Receiver and Transmitter
(USART) is a highly flexible serial communication device. The main features are:
•

Full Duplex Operation (Independent Serial Receive and Transmit Registers)

•

Asynchronous or Synchronous Operation

•

Master or Slave Clocked Synchronous Operation

•

High Resolution Baud Rate Generator

•

Supports Serial Frames with 5, 6, 7, 8, or 9 Data Bits and 1 or 2 Stop Bits

•

Odd or Even Parity Generation and Parity Check Supported by Hardware

•

Data OverRun Detection

•

Framing Error Detection

•

Noise Filtering Includes False Start Bit Detection and Digital Low Pass Filter

•

Three Separate Interrupts on TX Complete, TX Data Register Empty and RX Complete

•

Multi-processor Communication Mode

•

Double Speed Asynchronous Communication Mode

Dual USART

The ATmega162 has two USARTs, USART0 and USART1. The functionality for both
USARTs is described below.

USART0 and USART1 have different I/O Registers as shown in “Register Summary” on
page 303
. Note that in ATmega161 compatibility mode, the double buffering of the
USART Receive Register is disabled. For details, see “AVR USART vs. AVR UART –
Compatibility” on page 167.
Note also that the shared UBRRHI Register in ATmega161
has been split into two separate registers, UBRR0H and UBRR1H, in ATmega162.

A simplified block diagram of the USART Transmitter is shown in Figure 75. CPU acces-
sible I/O Registers and I/O pins are shown in bold.

Advertising