3 advanced operations, 1 accessing the phonebook, 1 preliminary phonebook set up – Rainbow Electronics GM862-GPS User Manual
Page 31
GM862-GPS Software User Guide
1vv0300729 Rev. 5 - 05/07/07
Reproduction forbidden w ithout Telit Communications S.p.A. w ritten authorization - All Rights Reserved
page 31 of 120
3 Advanced Operations
3.1 Accessing the phonebook
The GM862-GPS can access the phonebook storage of the SIM card inserted, by using specific AT
commands it is possible to store and recall phone numbers and their associated name.
3.1.1 Preliminary phonebook set up
The GM862-GPS supports several SIM phonebook storages:
•
"SM" - SIM phonebook
This is the PB used to store and recall numbers during the normal operation of the device.
•
"FD" - SIM fixed dialing-phonebook (only phase 2/2+ SIM)
This PB has several restrictions; to set it you need the PIN2 code and after having activated
the FD only the calls to the numbers stored in the FD or their children are allowed, all the other
calls are forbidden.
•
"LD" - SIM last-dialing-list (+CPBW and +CPBF are not applicable for this storage)
This is the list of the last dialed numbers, it is updated automatically at each call originated and
insertion or search on it is not possible, the only operations allowed are recall, read and delete.
•
"MC" - SIM missed-calls-list (+CPBW and +CPBF are not applicable for this storage)
This is the list of the missed calls calling numbers, it is updated automatically at each call
missed and insertion or search on it is not possible, the only operations allowed are recall, read
and delete.
•
"RC" - SIM received-calls-list (+CPBW and +CPBF are not applicable for this storage)
This is the list of the received calls calling numbers, it is updated automatically at each call
received and insertion or search on it is not possible, the only operations allowed are recall,
read and delete.
In order to access the storage you have to choose which one will be active. This must be the first PB
operation always. Once selected storage, it is not anymore needed to select it again until the desired
storage remains the one active and the device is not turned off.