Rainbow Electronics GM862-GPS - Manual (Page 93)

GM862-GPS Software User Guide
1vv0300729 Rev. 5 - 05/07/07
Reproduction forbidden w ithout Telit Communications S.p.A. w ritten authorization - All Rights Reserved page 93 of 120
- read the current time.
command:
AT+CCLK?<cr>
response:
+CCLK="02/11/07,13:24:47"<cr>
OK
- calculate & set up the next alarm in order to raise the GPIO6 pin to power up the controlling
application too.
command:
AT+CALA="02/11/07,14:24:47+01",0,6,"TIME TO MEASURE & SMS…!"<cr>
response:
OK
- shutdown the GM862-GPS and successively the controlling application.
command:
AT#SHDN<cr>
response:
OK