Final safety check, Securing child with harness system, 0 final safety checks – BabyTrend INERTIA INFANT User Manual

Page 27: 0 addition information

Advertising
background image

51

52

12.0

Final Safety Check

11.0

Securing Child with Harness System

11.3 Adjusting the Crotch Strap Length

1. Lift up on the crotch strap pad and you will see

the crotch strap anchor clip riding in a slot in

the crotch strap cavity in the car seat shell.

Pull outward on the metal clip, while feeding

the crotch strap webbing downward, until the

crotch strap metal clip is removed from the slot.

DO NOT attempt to completely remove the

crotch strap from the Car Seat. (Fig. 51-1)

2. Adjust the length of the Crotch Strap to the

desired length. For small children, the length

of the Crotch Strap is shortened by wrapping

additional strap material around the metal clip.

For larger children, the length is increased by

unwrapping material from around the metal

clip. (Fig 51-2)

3. Reinsert the Crotch Strap metal clip into the

slot in the Crotch Strap cavity while pulling

upward on the Crotch Strap buckle. Check that

the Crotch Strap metal clip is completely seated

all the way down in the slots before using the

Car Seat. (Fig 51-3)

4. Push the Crotch Strap buckle back up through

the slot in the Seat Pad and return the Seat Pad

to its original position on the seat shell.

12.0 FINAL SAFETY CHECKS

1. If your child is already in the Car Seat, check that the harness is

properly fitted and snugly adjusted as instructed in the section 11.1

Securing Your Child with Harness System.

2. Check that LATCH connectors are securely attached or vehicle seat

belt is tightly adjusted around base.

3. Place handle in storage or non-rocking position after installing in the

vehicle.

13.0 ADDITION INFORMATION

13.1 Care & Maintenance

Vehicle seat: Use a child restraint mat, towel or other cloth to protect

vehicle seat upholstery. Continuous use of a child restraint may cause

damage to an unprotected vehicle seat.
Car Seat – Plastic and Metal components: Clean with mild soap and

cold water. DO NOT use bleach or harsh detergents.
Buckle Adjuster and LATCH Connectors: Wipe clean with damp cloth

ONLY. If buckle/LATCH connectors will not securely lock, DO NOT use

this child restraint. DO NOT use lubricants of any kind on any of the

components of the Car Seat and Base, including the buckle and LATCH

system.
Harness Straps: Spot clean with damp cloth or replace. DO NOT

immerse straps in water. The straps may weaken and not perform as

designed.

51-1

51-2

51-3

Advertising