BabyTrend INERTIA INFANT - Manual (Page 29)

55 56
13.0
Additional Information
13.0
Additional Information
followed by the right Harness Strap. Check that Harness Straps
are completely within the Belt Adjuster Plate loop (Fig. 55-1). You
have two adjustment positions on the harness. Use Position A for
a smaller child, and Position B for a larger child. If using Position
A, loop B must be on top of the Belt Adjuster Plate. (Fig. 55-2)
7. Inspect the Harness Straps from the front and rear to ensure
that they are not twisted. Twisted straps can prevent proper
tightening of the Harness and thus may not adequately
restrain your child in a sharp turn, sudden stop or crash.
Before using the Car Seat, please pull on the Harness Straps
from the front to ensure that they are securely re-attached.
13.2 Using Your Car Seat with a Baby Trend Stroller
Please see the stroller owner’s manual for information on the use of the
Car Seat with the Baby Trend stroller.
AIRPLANE USE
This child restraint is certified for use in Aircraft ONLY without the base.
This Car Seat must be secured without the Base in an airplane
in the same manner as it is used in an automobile. Please
check with the airline in advance to determine their policies
regarding the use of Car Seats aboard the airplane. The Car
Seat must be used in only a forward facing airplane seat. Please
ask the flight attendant for assistance in placement of the Car
Seat. Please follow these instructions for proper installation
and perform the Final Safety Check as instructed herein.
REPLACEMENT PARTS
If You Need Help or Replacement Parts, please call our
Customer Service Department at 1-800-328-7363 between the
hours of 8:00 am and 4:30 pm, Pacific Standard Time, Monday
through Friday or visit us online at www.babytrend.com
55-2 55-1
A
A
B
B