American Car Craft Mustang Speaker Grille Kit Polished Mustang Style V6 & GT 2005-2009 User Manual
Page 3
correctly it should close the gap between the factory grille surround and the
door panel creating a nice looking finish.
SEE EXAMPLE:
5. With the front surface tabs properly prepared simply remove the red release
liner from the back of the new stainless grille overlay and carefully line up the six
overlay tabs with the grille surround tabs and firmly press the new cover into
position. Remove the protective liner.
SEE EXAMPLES:
6. Repeat steps for the opposite side.
Note: Care must be taken when cleaning your panel. It is a good idea to lightly
dust your panel with a clean soft cloth first in order to prevent any particles from
scratching it. Then wipe (using a new clean soft cloth) with a good quality streak
free glass cleaner.
If any questions occur during installation, please contact American Car Craft at
727-861-1500.
Thank you and enjoy your new purchase.
AMERICAN CAR CRAFT
18924 SAKERA ROAD-HUDSON FLORIDA 34667
Phone # 727-861-1500 Fax # 727-861-1520