American Car Craft Mustang Executive Series Fluid Cap Cover 5Pc Set - Carbon Fiber 2005-2009 Auto User Manual
Page 2
These new and unique caps are designed to set over the factory cap as a cosmetic cover
only. These chrome plated steel caps are simple to attach and offer a nice clean look.
1. The first step for installation will be to thoroughly scrub the tops of each of the factory
caps, the oil/water/washer fluid/brake fluid. Scrub them with alcohol to remove any
surface contaminants then swipe the tops with the adhesive promoter provided.
2. You have been provided with 2'' furry Velcro attachment cookies for each cap. Peel the
release liner from the back of each cookie and firmly set them to the top of each factory
cap.
3. The factory wind shield washer fluid cap will need to be trimmed slightly in order for
the new cover to sit nice and centered. To do this, simply snip the finger tab as well as the
attachment strap off the cap with a scissor.
4. Simply set them in place.
If you have any questions during installation please call American Car Craft at
727-861-1500.
Thank you and enjoy your new purchase.
AMERICAN CAR CRAFT
18924 SAKERA ROAD-HUDSON FLORIDA 34667
Phone # 727-861-1500 Fax # 727-861-1520