American Car Craft Ford Raptor Headlight Carbon Fiber Wrap 2Pc 2010-2013 User Manual
Page 2
edge of the graphic with a pencil for exact placement. This is important because we will recommend that the
graphic be put on dry for the best results. Although the graphic can be put on wet this would add a significant
amount of time and effort to the installation and will make the installation a lot more difficult than it needs to
be.
5. Once you have a good idea of how they will fit simply peel the release liner from the back of the graphic and
then careful set the graphic in place and then swipe the graphic with the felt squeegee provided. Be careful not
to stretch the graphic as you squeegee it as this will cause an undesirable overlap of the body ridge. Set all the
other section in the same way to finish the installation.
If any questions or problems occur during installation, please contact American Car Craft at 727-861-1500.
Thank You and Enjoy Your Purchase!
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520