Do not get wet for 24 hours – American Car Craft Camaro Side Marker Black Out Kit w_Polished Trim Rings 8Pc 2010-2013 User Manual
Page 2
Advertising
3. Place each bezel into position to familiarize yourself with each placement before
removing liner. VERY IMPORTANT: It will be necessary to hand form the bezels to
conform to the shape of the car before installing; doing this will prevent any
possibility of the bezel popping loose or lifting long term.
4. Once they are fitted properly peel the release liner from the back of each bezel
and carefully set them nice and evenly around each light. Press firmly to set.
DO NOT GET WET FOR 24 HOURS
If any questions occur during installation, please contact American Car Craft at
727-861-1500.
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520
Advertising