American Car Craft Camaro Exterior Badges Polished "Super Sport 2Pc 2010-2013" User Manual
Do not get wet for 24 hours

AMERICAN CAR CRAFT INSTRUCTIONS
POLISHED STAINLESS SUPER SPORT EXTERIOR BADGES
patent pending
PART#102007
patent pending
PARTS INCLUDED:
2pc Stainless Badge Set
1-Adhesive Promoter Tube
Your badges are designed to be used on the exterior surface of your car and can be placed to any
flat surface that you choose.
1. Clean the area to be mounted with household rubbing alcohol to remove any wax and dirt
then swipe the area once with the adhesive promoter tube provided.
2. Place each badge into position to familiarize yourself with each placement before
removing the liner. It MAY BE necessary to HAND FORM the badges to CONFORM to
the shape of the car doing this will prevent any possibility of the badge popping loose or
lifting long term.
3. Once they are fitted properly peel the release liner from the back of each badge and
carefully set them nice and evenly to your car. Press firmly to set.
DO NOT GET WET FOR 24 HOURS!
IF ANY QUESTIONS OCCUR DURING INSTALLATION PLEASE CONTACT
AMERICAN CAR CRAFT AT 727-861-1500.
Thank You and Enjoy Your New Purchase.