American Car Craft Prowler Side Marker Light Plate with Kat Logo 2Pc Polished 1997-2002 User Manual
Page 2
marker lights.
1. Once you are comfortable with exactly how it will fit you may take the red backing off the back side
exposing the sticky tape.
2. Take your promoter packet and wipe the entire area where your Trim Plates are going to attach.
3. Very carefully re-position the Trim Oval Covers in place without touching it against the Side marker
light. Once you are certain that is where you want it - lightly set it against the marker side light. Make
any final tiny adjustments. Once this is done, press on the Trim Oval Cover firmly. With your fingers
press all around the surface of the Trim Oval Cover to ensure it is sticking everywhere it touches the
dash.
4. Do the same to procedure to the other side. Clean the area with rubbing alcohol.
If any questions or problems occur during installation, please contact American Car Craft at 727-861-1500.
Thank You and Enjoy Your Purchase!
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520