American Car Craft Corvette Side Marker Light Bezels Polished 4Pc 2006-2013 C6 only User Manual
Do not get wet for 24 hours
AMERICAN CAR CRAFT INSTRUCTIONS
C6 CORVETTE SIDE MARKER LIGHT BEZELS
PART# 042066
patent pending
PARTS INCLUDED:
4-Stainless Side Marker Bezels
1-Adhesive Promoter Tubes
Your side marker bezels are designed to go around your side marker lights and attach
directly to the painted surface.
1. Clean the area around each of the side marker lights with household rubbing
alcohol to remove any wax and dirt then swipe the area once with the adhesive
promoter tube provided.
2. Place each bezel into position to familiarize yourself with each placement before
removing the liner. It WILL BE necessary to HAND FORM the bezels to
CONFORM to the shape of the car doing this will prevent any possibility of the
bezel popping loose or lifting long term.
3. Once they are fitted properly peel the release liner from the back of each bezel and
carefully set them nice and evenly around each light. Press firmly to set.
DO NOT GET WET FOR 24 HOURS.
IF ANY QUESTIONS OCCUR DURING INSTALLATION PLEASE CONTACT AMERICAN
CAR CRAFT AT 727-861-1500.
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520
www.americancarcraft.com