American Car Craft Chrysler 300 _ Dodge Charger_Magnum 5.7 Inner Fender Covers Polished 2005-2010 - Manual (Page 3)

the front hole, Start the screw but do not tighten! Using a scratch awl locate the back
hole. Make sure the spacer is in position and place a second screw assembly thru the
hole and start screw by hand. Secure both screws but be sure NOT TO OVERTIGHTEN as
this will distort your new panel. Just make screws snug, it will be sufficient. Once secure
snap chrome cover in place.
5. Prep the factory fuse box cover by scrubbing the top of it with household isopropyl
alcohol. Let dry and they wipe once with the adhesive promoter (provided). With the
fuse box cover in an open position snip the small plastic cross bar off the cover so as to
allow cover to be opened and closed without latching. Then place the small section of
the new fuse cover so that it lines up with the front of the fuse box cover and just over
enough to cover the front part of the fuse box opening in the fender cover. Bend the
stainless fuse box cover by hand if necessary to insure a nice even fit. Then remove the
red liner and reposition. Press firmly to set. Next place the large section of the fuse box
cover in position so that it hides all the exposed areas of the fuse box opening. Make
note of its position. Remove the red liner and reposition. Press firmly to set. Make sure
that the fuse box door is able to open and close freely.
6. The installation for the driver side cover is the same as the passenger side only it will
be necessary to remove the black cable retainer from the shock tower and discard. Then
follow the same attachment procedures. With the fender cover in place install the
chrome replacement radiator cap.
If any questions occur during installation, please contact American Car Craft at 727
861-1500.
Thank you and enjoy your new purchase.
Note: Care must be taken when cleaning your covers. It is a good idea to lightly dust
your covers with a clean soft cloth first in order to prevent any particles from
scratching it. Then wipe (using a new clean soft cloth) with a good quality streak free
glass cleaner.