American Car Craft Pontiac G8 Mirror Trim Brushed Side View GT 2008-2009 User Manual
American car craft instructions
AMERICAN CAR CRAFT INSTRUCTIONS
G8 Side View Mirror Trim
PART #221004
Parts Included:
___2- Stainless Mirror Trim Rings
Introduction: This all new stainless trim ring accessory is an American Car Craft original idea that will add that cool little something
to your car mirrors that would otherwise just be a plain OEM mirror.
1. Thoroughly clean the mirrors glass and perimeter with alcohol to remove any dust /dirt and wax.
2. Before you permanently attach the trim ring, set it onto the mirror to get and idea of just how it will set in place and also to get a
look at the overall shape. Although it should not be necessary you may need to adjust the perimeter shape so that it matches the
mirrors edge perfectly. The stainless is very thin and will allow you to do any adjustment by hand very easily. TECH TIP: Should any
adjustments be necessary it would be best to set the trim ring on a totally flat surface such as a Formica counter top or piece of
glass. This will help to prevent the trim ring from warping out of shape and will keep the ring to remain totally flat.
3. After you have got a good idea how the ring will sit, slowly remove the release liner from the back of the trim ring and then
carefully set the ring in place pressing firmly along the entire perimeter to set the ring. Pressing firmly along the edge is very
important to achieve a nice long lasting bond.
If any questions or problems occur during installation, please contact American Car Craft at 727-861-1500.
Thank You and Enjoy Your Purchase!
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520