American Car Craft Hummer H2 Driving Light Trim Rings Polished 4Pc 2003-2013 User Manual
Do not get wet for 24 hours
AMERICAN CAR CRAFT INSTRUCTIONS
HUMMER 4-pc STAINLESS DRIVING LIGHT BEZELS
PART # 492001
Patent Pending
PARTS INCLUDED:
4-Stainless Light Ring Bezels
2-Adhesive Promoter Tubes
Your new bezels are designed to fit directly to the light itself as well as the surrounding bumper cover.
1. Clean the light and light opening with household rubbing alcohol to remove and dirt and wax.
Then swipe the clean area once with the adhesive promoter tube provided.
2. Peel the red release liner from the back of each ring and carefully set them nice and evenly
around the light and bumper cover opening. Press firmly to set. Repeat steps for opposite side.
DO NOT GET WET FOR 24 HOURS
IF ANY QUESTIONS OCCUR DURING INSTALLATION PLEASE CONTACT AMERICAN CAR CRAFT
AT 727-861-1500.
Thank You and Enjoy Your New purchase!