American Car Craft Corvette Door Lock Trim Plate 2Pc w_option button Brushed 2005-2013 C6 - Manual (Page 3)

Installation errors are NOT manufacturing
defects and parts
CANNOT be returned
due to improper installation.
5. Before you remove the red liner for permanent attachment place the door
trim plate into position and check the fit. Your plates come to you
preformed however it will be necessary to form by hand to insure a
nice perfectly contoured fit. When you are holding the plate up to the
door it should lay flat and conform to the shape of the door without
forcing it. (In other words it should look like it is installed and not be
protruding from the door panel in any way). Please refer to the pictures at
the end of these instructions. Make note of its position. NOTE: Be sure that
your trim plates lay flat to your door with no gaps between them and your
door.
6. Remove the red liner (be sure not to touch the adhesive) and carefully
reposition the door lock plate, press firmly on the plate to set.
7. Then repeat steps 1-6 for the other door.
If any questions occur during installation please contact
American Car Craft @ 727 861-1500.
Thank you and enjoy your purchase!
Note: Care must be taken when cleaning your door lock trim. It is a good
idea to lightly dust your trim plates with a clean soft cloth first in order to
prevent any particles from scratching them. Then wipe (using a new clean
soft cloth) with a good quality streak free glass cleaner.
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520
www.americancarcraft.com