American Car Craft Corvette C5 Emblem Trim 2Pc 1997-2004 C5 & Z06 User Manual
American car craft instructions, C5 corvette 2pc emblem trim ring, Do not get wet for 24 hours
AMERICAN CAR CRAFT INSTRUCTIONS
C5 CORVETTE 2pc EMBLEM TRIM RING
PART#032037
PARTS INCLUDED:
2-Stainless Emblem Bezels
1-Adhesive Promoter Tube
Your emblem bezels are designed to go around your front and rear factory emblem or your convertible
waterfall emblem and attach directly to the painted surface.
1. Clean the area around each emblem with household rubbing alcohol to remove any wax and dirt
then swipe the area once with the adhesive promoter tube provided.
2. Place each bezel into position to familiarize yourself with each placement before removing the
liner. It WILL BE necessary to HAND FORM the bezels to CONFORM to the shape of the car
doing this will prevent any possibility of the bezel popping loose or lifting long term.
3. Once they are fitted properly peel the release liner from the back of each bezel and carefully set
them nice and evenly around each emblem. Press firmly to set.
DO NOT GET WET FOR 24 HOURS.
IF ANY QUESTIONS OCCUR DURING INSTALLATION PLEASE CONTACT AMERICAN
CAR CRAFT AT 727-861-1500.
Thank You and Enjoy Your New Purchase!!
AMERICAN CAR CRAFT
18924 SAKERA ROAD-HUDSON FLORIDA 34667
Phone # 727-861-1500 Fax # 727-861-1520