Do not get wet for 24 hours – American Car Craft Corvette 5th Brake Light Trim Crossed Flags Style Polished 2005-2013 C6 all User Manual
Page 2
factory lens without having to force the bezel to set flat. NOTE: If you consider that
metal will NOT bend itself out of shape than you can expect that if you install a nicely
shaped bezel conformed to the factory lens that it will remain in place and not lift off the
factory lens over time or being exposed to the elements.
2. Now that you have a nicely shaped bezel simply remove the release liner from the back
of the new bezel and carefully set the bezel in position. Press the bezel firmly along its
entire length to set.
DO NOT GET WET FOR 24 HOURS!
If any questions occur during installation please contact American Car
Craft @ 727-861-1500.
Thank you and enjoy your purchase!
Note: Care must be taken when cleaning your bezel. It is a good idea to
lightly dust your bezel with a clean soft cloth first in order to prevent any
particles from scratching it. Then wipe (using a new clean soft cloth) with a
good quality streak free glass cleaner.
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520