American Car Craft Camaro Hood Panel Emblem Brushed with Carbon Fiber "RS 2010-2013" User Manual
American Car Craft For the car
AMERICAN CAR CRAFT INSTRUCTION
2010+ Polished RS carbon fiber hood emblem
PART#103019
PARTS INCLUDED:
_Carbon fiber Vinyl
_Stainless Hood Emblem
1. Thoroughly clean the hood panel to remove any road grime and dirt.
2. You have been supplied with a background color. Peel the release liner from the back of this
sticker and then carefully set it into the desired position. Press it onto the hood panel dry using
your thumb. Using your thumb as opposed to a squeegee will actually allow you to set the
sticker perfectly and offer you more control to do so without creating air bubbles. Also take a
little time to make sure that you position is centered and nice and straight. Remove the transfer
tape.
3. Now that you have your background color mounted straight and center the main emblem is
just an easy peel and stick. Before you permanently stick the emblem you need to make a
couple of dry runs to familiarize yourself with just how you will approach the position. The
adhesive is very aggressive and will not allow you to reposition it once it makes contact so go
slowly. When you are ready simply peel the red release liner from the back of the emblem being
careful not to deform the emblem in the process. Bring the emblem close to the position and
then firmly press it to the hood.
If you have any questions during installation, please call 727.861.1500
Thank you for your purchase!
AMERICAN CAR CRAFT
18924 SAKERA ROAD-HUDSON FLORIDA 34667
Phone # 727-861-1500 Fax # 727-861-1520