American Car Craft Corvette Stock Air Tube Cover Perforated 1997-2004 C5 & Z06 User Manual
American Car Craft For the car
AMERICAN CAR CRAFT INSTRUCTION
C5 Perforated Stock Air Tube Cover
PART#033067
THIS COVER IS DESIGNED TO FIT THE STOCK FACTORY AIR TUBE.
PARTS INCLUDED:
2- 1-5/8 Stainless washer head screws
2- 1” Chrome Caps Covers with Putty
1-Stainless Factory Air Tube Cover
Your new stainless air tube cover comes to you with a clear protective liner. Do not
remove until step 3.
1. Position your new cover over the factory air tube and make note of its position. It may
be necessary to mold slightly my hand in order to achieve a nice proper looking fit. Once
you are satisfied with the fit and position mark the two holes directly to the air tube with
a silver marker or scratch awl.
2. Remove cover and poke a hole directly into the air tube with a scratch awl at the two
points that you have just marked. NOTE: Poking a hole as apposed to drilling a hole will