American Car Craft Corvette Driving Light Covers Laser Mesh Blakk Stealth 2Pc 2005-2013 C6 only User Manual
American Car Craft For the car
AMERICAN CAR CRAFT INSTRUCTIONS
C6 CORVETTE LASER MESH DRIVING LIGHT COVERS BLAKK STEALTH
PART#042105
PARTS INCLUDED:
2-Stainless Laser Mesh Driving Light Covers w/attachment tape
1-Adhesive Promoter Packet
1. Clean the surface of your light lens first with household rubbing alcohol to
remove any dirt and or waxes. Then swipe the lens area once with the adhesive
promoter tube provided.
2. Before permanent installation carefully place the new stainless light cover into
position to check the shape of the cover. Make sure the overall shape of the new
cover matches the shape of the factory lens exactly. Although the new cover
comes to you pre shaped it will be necessary to gently form the cover by hand
until you have achieved a nice perfect conformed fit to your factory lens cover
without forcing. At this time you will need to make note of just how the cover sits
in place making sure it sits nice and centered on the factory lens.