American Car Craft Corvette Doorsills Inner Polished 2pc 1997-2004 C5 & Z06 User Manual
American Car Craft For the car
AMERICAN CAR CRAFT INSTRUCTION
C5 CORVETTE POLISHED INNER DOORSILLS
PART#031014
PARTS INCLUDED:
2-POLISHED INNER DOORSILLS
2-ADHESIVE PROMOTER PACKS
PLEASE NOTE THIS IS A PERMANENT INSTALLATION AND THE NEW
DOORSILLS CANNOT BE REMOVED WITHOUT DAMAGING THEM.
Your new doorsills come to you with a protective liner. DO NOT remove the liner until step 5.
1. Thoroughly clean the surface first with soap and water then with household isopropyl
alcohol.
2. Then swipe the same area with the adhesive promoter (provided). This promoter will
guarantee a good permanent bond.
3. It may be necessary to fit these sills by squeezing or opening them to insure a proper fit.
4. When you are satisfied with the fit, remove the red liner from the attachment tape and
press firmly.
IT IS VERY IMPORTANT THAT YOU SLOWLY INSERT THE SILLS INTO PLACE.
THE ATTACHMENT TAPE IS VERY RELIABLE AND IT MIGHT BE A GOOD IDEA
TO MAKE A COUPLE OF TEST FITS BEFORE PULLING THE RED LINER!
YOU HAVE ONLY ONE SHOT AT THIS SO GO SLOWLY!
5.
Once in place remove the protective liner. Repeat steps 1-5 for the opposite doorsill.
If you have any questions during installation please call American Car Craft at 727 861-
1500. Thank you and enjoy your new purchase.