American Car Craft Corvette Side Vent Grilles Laser Mesh 2Pc Polished 2009-2013 ZR1 only User Manual
American car craft instructions

AMERICAN CAR CRAFT INSTRUCTIONS
C6 Corvette ZR1 Vent Grilles Laser Mesh Side Polished 4p
PART #042102
Parts Included:
4 –Stainless Side Vent Covers
2-Adhesive Promoter Sticks
These 4pc stainless vent overlays easily install right on top of your factory vents via 3m
attachment tape included.
1. The first thing that needs to be done in any peel and stick application is surface preparation. It is important
that you examine the surface to determine if any kind of special treatments have ever been used. Such as wax/silicone
treatments and/or polymer surface preps. Take a strip of masking tape and press it very firmly to make it adhere to the
surface. Then peel it off to see how difficult it is to remove. If your masking tape is removed extremely easy and/or does
not stick at all then you will need to perform a special surface preparation. In most cases like this you will need to make
a solution of a straight detergent (Johnson’s Baby Shampoo or Palmolive Dish Soap) and water. Mix a 32oz bottle with
about five table spoons of soap detergent. Once you have the solution made wash the surface scrubbing quite