American Car Craft Mustang Shock Tower Covers Polished_Perforated 4Pc V8 & GT 5.0 2011-2012 - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
2011-2012 MUSTANG PERFORATED SHOCK TOWER DOMES
PART #273023
Parts Included:
8-8mm Nuts
8-Chrome Top Hat Style Caps
2-2pc Perforated Shock Tower Domes
Introduction: These new all stainless covers are the answer to customizing an area of your mustang that
generally does not want to be covered! Its perforated top area not only looks good but allows the cover to
conform to the top of your shock towers uneven surface providing much needed clearance for the hood.
Liner Information: Your new accessories will come to you with a protective surface liner. Leave this liner in
place until the installation is complete to prevent finger prints and or possible scratches during installation.
1. Your new stainless covers will only fit one way. The contoured shape has been designed to set around
the top of your shock tower so that the seam will line up with the small elongated hole at the top of
the shock tower facing the back of the car. Take a moment to determine which cover sets in place and
then tweak the oval shape of the cover by hand so that it contours around the shock tower nice and