American Car Craft Dodge Challenger Side Marker Trim 4Pc Polished 2008-2013 User Manual
American Car Craft For the car

AMERICAN CAR CRAFT INSTRUCTION
POLISHED CHALLENGER SIDE MARKER LIGHT BEZELS
PART# 152007
patent pending
PARTS INCLUDED:
4-Stainless Side Marker Bezels
1-Adhesive Promoter Tube
Your side marker bezels are designed to attach directly on the side marker lens.
1. Clean each side marker lens with household rubbing alcohol to remove any
wax and dirt then swipe the area once with the adhesive promoter provided.
2. Place each bezel into position to familiarize yourself with each placement
before removing liner. VERY IMPORTANT: It will be necessary to hand
form the bezels to conform to the shape of the car before installing; doing
this will prevent any possibility of the bezel popping loose or lifting long
term.
3. Once they are fitted properly peel the release liner from the back of each
bezel and carefully set them nice and evenly around each light. Press firmly
to set.
DO NOT GET WET FOR 24 HOURS
IF ANY QUESTIONS OCCUR DURING INSTALLATION PLEASE CONTACT
AMERICAN CAR CRAFT AT 727-861-1500
Thank You and Enjoy Your New Purchase!