American Car Craft Prowler Chrome Oil Fill Cap Cover with Kat Logo 1Pc 1997-2002 User Manual
American car craft instructions
AMERICAN CAR CRAFT INSTRUCTIONS
1997-2002 Prowler Chrome Fluid Cap Cover
PART #823021
Parts Included:
1-Chrome Cap Cover
1-Velcro Attachment Cookie
1-Adhesive Promoter
Introduction:
1. Place the main cap over the vent hat on the factory fluid cap allowing the vent cap to protrude through the hole atop
the cap.
2. You have been provided with a small chrome decorative cap that contains butyl putty under this cap cover. Remove
the paper liner from the butyl and simply press it onto the vent hat. This will attach the cap to the vent hat in such a way
that it will allow you to remove and replace the fluid cap by detaching the chrome cap along with the plastic vent hat to
release the main cap. To replace the cap simply set it place and then snap the chrome cap and vent hat assembly into
the vent hat base.
If any questions or problems occur during installation, please contact American Car Craft at 727-861-1500.
Thank You and Enjoy Your Purchase!
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520