American Car Craft Corvette Doorsills Outer Laser Etched with C5 "CORVETTE Polished 1997-2004 C5 & Z06" User Manual
American Car Craft For the car

AMERICAN CAR CRAFT INSTRUCTION
POLISHED GM LICENSED DOORSILLS
PART#031013
PARTS INCLUDED:
2-Stainless Doorsills
2-Adhesive Promoter
2- 32’’ of 1/8” Chrome Molding Strips
PLEASE NOTE THAT THIS IS A PERMANENT INSTALLATION AND THE
NEW DOORSILLS CANNOT BE REMOVED WITHOUT DAMAGING THE
PART. PLEASE NOTE YOUR CAR WILL NOT BE DAMAGED IN ANY WAY.
Your new doorsills come to you with a protective liner that you will remove after
installation. This will help produce a nice clean install.
1. Thoroughly clean the surface area first with soap and water then with household
isopropyl alcohol.
2. Then swipe the same area with the adhesive promoter (provided). This promoter
will guarantee a good permanent bond.
3. VERY IMPORTANT!!!! Gently pre-bend the sills to fit. The metal is flexible
enough to allow you to gently curve it so that the sills fit and conform to the
door area without forcing it to lay flat.
4. When you are satisfied with the fit, remove the red liner from the attachment tape
and firmly press.