American Car Craft Corvette Hood Panel Badge C5 Crossed Flags for factory hood pad 1997-2004 C5 all - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
C5 Corvette Hood Panel Badge (1997-2004 Factory Hood Panel Only)
PART #033080
PARTS INCLUDED:
1- C5 Emblem
1-Adhesive Promoter
PROTECTIVE LINER INFORMATION: Your new accessories will come to you with a protective surface liner.
Leave this liner in place until the installation is complete to prevent finger prints and/or possible scratches
during installation.
1. Remove the factory hood panel (pad) by popping all the hood retainers off. Keep these fasteners; they
will be re-used to re-install the hood panel.
2. Wipe the indented C5 hood panel emblem with a cleaner to remove any kind of grease or dirt from the
road.
3. Use the supplied adhesive promoter packet and wipe the indented C5 hood panel emblem.
4. Now the C5 emblem will have 7 tabs sticking out of the back of the part. (These tabs a very pointy so
be careful while installing it so that you don’t poke yourself) These tabs will push through the factory
black hood pad and bend back onto the hood pad. Holding the emblem to the hood pad.