American Car Craft Corvette Battery _ Fuse Box Cover - Perforated 1997-2004 C5 & Z06 User Manual
Page 2
4. Turn over the fuse relay cover and remove attachment screw by spreading the slits holding screw
in place.
5. Slide off the positive battery post cover. This cover will not be reused.
NOTE: This is attached to the Fuse Relay Cover.
6. Place a few dabs of household silicone to both ends of the cover and place the cover over the Fuse
Relay Cover.
7. Snap attachment screw back in and screw cover in place. You have been supplied with a round
screw cover simply swipe the top of the attachment screw with the adhesive promoter provided
and place the Velcro attachment dot directly to the screw head. Then you can attach the 2”
stainless screw cover in place. NOTE: This cover will need to be removed to gain access to the
attachment screw.
If any questions occur during installation, please contact American Car Craft at 727 861-1500.
Thank you and enjoy your new purchase.
Note: Care must be taken when cleaning your cover. It is a good idea to lightly dust your cover with a
clean soft cloth first in order to prevent any particles from scratching it. Then wipe (using a new clean soft
cloth) with a good quality streak free glass cleaner.
AMERICAN CAR CRAFT
18924 SAKERA ROAD-HUDSON FLORIDA 34667
Phone # 727-861-1500 Fax # 727-861-1520