American Car Craft Corvette Nose Cap Front Polished Component 2005-2013 C6+GS User Manual
Page 2
Advertising
3M attachment tape. Remove the red liner from the tape and line up the nose
cap just under the rubber seal molding. Be sure to catch the entire small ridge
running just under this molding and press firmly to set. Remove protective liner.
Note: Care must be taken when cleaning your cover. It is a good idea to lightly dust
your cover with a clean soft cloth first in order to prevent any particles from
scratching it. Then wipe (using a new clean soft cloth) with a good quality streak
free glass cleaner.
If any questions or problems occur during installation, please contact American Car
Craft at 727-861-1500.
Thank You and Enjoy Your Purchase!
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520
Advertising