American Car Craft Corvette Nose Cap Front Polished Component 2005-2013 C6+GS - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
C6 CORVETTE COMPONENT FRONT NOSE CAP
PART#043020
patent pending
ITEMS NEEDED: ITEMS PROVIDED:
Household Isopropyl Alcohol 4-Speed Clips
Small Socket Set 4- Flat Head Screws
Right Angle Pick Adhesive Promoter
Your nose cap comes to you with a protective liner; do not remove liner until final
step.
1. Remove the bumper screws and factory clip nuts attaching the nose piece to
the steel bumper. A right angle pick works best for this. Replace with the four
speed clips and flat head screws provided. Tighten to a snug and flush position.
The flat head screw will countersink itself as long as it is not over tightened.
2. Prep the entire area first with household isopropyl alcohol then wipe with the
adhesive promoter provided. Be sure not to miss the area just under the rubber
seal.
3. Your new nose piece is designed to permanently attach to the nose area via