American Car Craft Challenger_Charger_Magnum_300 SRT 8 6.1L Plenum Cover Perforated Illuminated 2008-2011 - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
Challenger SRT 8 Perforated Plenum Cover Illuminated
PART #153027
Parts Included:
1-Stainless Perforated Plenum Cover Illuminated
Introduction: This new plenum cover has been designed for the SRT8 hemi engine. It is a very easy part to
install with no tools and or special preparations. It is a handmade all stainless accessory you will love for years.
Liner Information: Your new accessories will come to you with a protective surface liner. Leave this liner in
place until the installation is complete to prevent finger prints and or possible scratches during installation.
1. Your new cover has been designed to simply place securely directly on top of the factory SRT8 plenum.
It has been designed to utilize all of the valleys and forms of the factory plenum to hold it secure from
shifting in any direction and or vibrations. Before you begin to set this cover in place take a moment to
lift off the protective liner from the lower edges of the cover as this will be very difficult to achieve
once the new cover is in place.
2. Now that you have removed some of the liner set it directly onto the plenum. Because of the angled
front you will need to force the front end of the covers angled shape warping the entire shape of the